Frustrated by stripped screws? In the industrial world, where efficiency and precision are paramount, traditional screws often fall short. Enter the Torx screw—with its distinctive star-shaped design—emerging as the ideal solution for high-torque applications. Not only does it prevent stripping, but it also enhances productivity and ensures reliable connections.
1. Torx Screws: The Six-Pointed Star That Changed Fastening
Torx, pronounced "torks," is a trademarked screw drive type developed by Camcar Textron in 1967. Its most recognizable feature is the six-pointed star pattern, earning it the nickname "star screw." The International Organization for Standardization (ISO) formally designated it as "ISO 10664," or "internal hexalobular." In databases and catalogs, it may be abbreviated as "6lobe" (note the numeral "6"). Torx Plus, Torx Paralobe, and Torx ttap are further refinements of the original design.
Torx screws are widely used in automotive systems, motorcycles, bicycle disc brakes, hard drives, computers, and consumer electronics. Initially, their specialized drivers made them a deterrent against tampering. However, as Torx drivers became more accessible, security variants were introduced. Today, Torx screws are increasingly popular in construction.
2. How It Works: Engineering Meets Performance
The Torx design was created to resist cam-out (slippage) better than Phillips or slotted screws. While Phillips screws are designed to cam out to prevent overtightening, Torx eliminates this issue entirely. This is made possible by advancements in torque-limiting automatic screwdrivers, which deliver consistent torque without damaging the fastener or workpiece.
The Torx geometry allows higher torque application compared to similarly sized hex drives, without damaging the tool or screw head. The contact surfaces are optimized to minimize radial forces that could deform the drive or fastener. This efficiency also enables smaller head sizes, ideal for space-constrained applications.
3. Sizing Guide: From T1 to T100
Torx sizes are denoted by a "T" followed by a number (e.g., T10, T25). Smaller numbers indicate smaller drive sizes. Common sizes include T10, T15, and T25, while T35 and T47 are often specialty sizes. External Torx variants (for socket-driven fasteners) use an "E" prefix (e.g., E8, E24). Below is a detailed sizing chart:
|
Size
|
Point-to-Point (in)
|
Point-to-Point (mm)
|
Max Torque (lb·ft)
|
Max Torque (N·m)
|
~ E Torx
|
|
T1
|
0.035
|
0.90
|
0.015–0.022
|
0.02–0.03
|
|
|
T5
|
0.059
|
1.50
|
0.32–0.38
|
0.43–0.51
|
E2
|
|
T20
|
0.156
|
3.95
|
7.7–9.4
|
10.5–12.7
|
E4
|
|
T50
|
0.352
|
8.95
|
97–117
|
132–158
|
E10
|
|
T100
|
0.882
|
22.40
|
1,359–1,511
|
1,843–2,048
|
E24
|
4. The Torx Family: Variants for Every Need
Beyond the standard six-lobe design, Torx includes specialized variants:
-
Security Torx (TR):
Features a central pin to deter tampering. Smaller flathead drivers can sometimes bypass it.
-
Torx Plus:
Offers squarer lobes for higher torque and reduced wear. Incompatible with standard Torx drivers.
-
Torx ttap:
Includes a secondary groove for a "friction-fit" grip, minimizing wobble during use.
-
External Torx:
Reverses the design—the screw head resembles a Torx bit, driven by a socket.
5. Competing Systems: Alternatives to Torx
Other star-drive systems include:
-
AW Drive:
A hexagonal design with tapered sides for centering, developed by Germany’s Würth Group.
-
T-Star Plus:
Similar to Torx ttap, introduced by Spax for improved grip.
From preventing stripped screws to enabling precision torque control, Torx has redefined fastening technology across industries. Its evolving designs continue to set the standard for reliability and efficiency.
Your message must be between 20-3,000 characters!
